Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
PRODUCTS
Customized capacitive touch panel 4"-86"
- Details
- Product Overview
- Product Structure
- Customization
-
Product Specifications - General Item Specifications General Type Projected Capacitive Touch Panel Input Method Finger, Active Stylus, Gloved Touch (up to 50 touch points) Hardness ≥ 7H / ≥ 3H (PG products) Durability Warranty Standard Products: 1.5 years / Custom: As per application Tapping 10 Million Sliding 1 Million Electrical Operating Voltage 2.5 – 5V Response Time ≤ 25 ms Optical Transmittance ≥85% Haze ≤2% Environmental Storage Temp -30⁰C ~ +70⁰C Operating Temp -20⁰C ~ +60⁰C Relative Humidity 10 – 90% RH Non-Condensing -
Multi touch PCAP Capacitive Touch Screen Panel
Qile offers a wide range of Projected Capacitive (PCAP) touch screens (also known as PCT), with a variety of enhancements, sizes and others options. We offer in-house design, engineering services, firmware tuning and other options to optimize the final touch solution for your end use.
Advantages: Projected capacitive touch screens offer superior touch performance, optical quality, lifespan, resistance to damage and other considerations. Our projected capacitive touch screens can support multiple gestures and up to 50 simultaneous touch points.
Application: Projected capacitive touch screens are commonly used in appliances, POS and retail, legal and amusement gaming, in-vehicle, industrial terminals, etc.
Features:
- High accuracy, sensitivity and linearity without periodic calibration
- Wide variety of screen enhancements and optical filters available
- Wide range of customization options for cover lens materials, decoration and other aspects
- Wide range of supported ICs and hardware
- Firmware tuning support provided by in-house dedicated software engineers
-
Structure of Multi touch PCAP Capacitive Touch Screen Panel
Glass + Glass (G + G)The panel is made of glass functional sheet and glass cover, which has good optical transparency, strength and light transmittance. It is one of the most common panel structures and is especially suitable for applications requiring good optical performance and high strength.
The cover consists of scratch-resistant glass (average hardness >7H), which can also be heat-treated or replaced by special glass such as Gorilla or Dragon Trail for better performance. For extreme applications, the cover plate thickness is up to 6 mm.
Glass + Film (G1F)
The panel consists of an inner PET film optically bonded to an outer glass cover. Lighter and thinner than GG for applications where weight and thickness are critical.
The cover consists of scratch-resistant glass (average hardness >7H), which can also be heat-treated or replaced by special glass such as Gorilla or Dragon Trail for better performance. For extreme applications, the cover plate thickness is up to 6 mm.
Glass+Film+Film (GFF)
The panel consists of 2 layers of PET film optically bonded to the outer glass cover plate. Similar strength to GG, but lighter and thinner than GG. Suitable for applications where weight and thickness requirements are high and are stronger and more impact resistant than G1F.
The cover consists of scratch-resistant glass (average hardness >7H), which can also be heat-treated or replaced by special glass such as Gorilla or Dragon Trail for better performance. For extreme applications, the cover plate thickness is up to 6 mm.
Plastic + Glass (P + G )
Comprising a plastic outer layer and a glass sensor layer, the panel is very cost-competitive in a smaller size and is lighter than an equivalent GG construction, but the plastic is prone to scratching. Typically suitable for small size applications where safety and cost are a concern.
According to product requirements, the cover plate can be composed of various plastic materials (PET, PC, composite materials, etc.), and the hardness can be between 2-4H. Although the plastic material is soft and easily scratched, it ensures no safety hazards due to glass shards, reduces costs and lead times, and improves forming and screen printing capabilities.
-
Product Specifications - General Item Specifications General Type Projected Capacitive Touch Panel Input Method Finger, Active Stylus, Gloved Touch (up to 50 touch points) Hardness ≥ 7H / ≥ 3H (PG products) Durability Warranty Standard Products: 1.5 years / Custom: As per application Tapping 10 Million Sliding 1 Million Electrical Operating Voltage 2.5 – 5V Response Time ≤ 25 ms Optical Transmittance ≥85% Haze ≤2% Environmental Storage Temp -30⁰C ~ +70⁰C Operating Temp -20⁰C ~ +60⁰C Relative Humidity 10 – 90% RH Non-Condensing Product Customization Parameter Options & Notes Screen Size (Inches) Custom size(4"-86") Integrated LCD Yes/No. Product Construction GG / G1F / GFF / PG Integration Tape Bonding / Optical Bonding (OCA & LOCA) Cover Lens Cover Lens Thickness 0.55mm – 10mm Cover Lens Material CS Glass, Gorilla Glass, Heat Tempered, PET, PMMA, etc. Additional Options Silk screening, logos, cut outs, colored glass, etc. Touch Controller & Interface Controller Location COB / COF Controller Type Silicon Works / EETI / Weida / Ilitek / Goodix / Customer Supplied Interface I2C, USB, RS232, UART Operating System Windows XP, 7-10, Linux, iOS, Android Touch Performance 2-50 touch points, palm rejection, water rejection,glove use,gestural controls, active stylus, etc. Miscellaneous Optical ≥85% Transmittance, ≤3% Haze Operating Temperature -20 C to 70 C Storage Temperature -30 C to 70 C Lifespan ≥5 million touches Product Enhancements Optical Anti-Glare / Anti-Reflection / Mirror Finish / Dead Front Others Anti-Fingerprint / Anti-Shatter Film / Hard Coat / EMI Resistance
the previous
Next
ONLINE MESSAGE
*Note: Please fill in the information accurately and keep the communication smooth. We will contact you as soon as possible
Customized capacitive touch panel 4"-86"
- Details
- Product Overview
- Product Structure
- Customization
-
Product Specifications - General Item Specifications General Type Projected Capacitive Touch Panel Input Method Finger, Active Stylus, Gloved Touch (up to 50 touch points) Hardness ≥ 7H / ≥ 3H (PG products) Durability Warranty Standard Products: 1.5 years / Custom: As per application Tapping 10 Million Sliding 1 Million Electrical Operating Voltage 2.5 – 5V Response Time ≤ 25 ms Optical Transmittance ≥85% Haze ≤2% Environmental Storage Temp -30⁰C ~ +70⁰C Operating Temp -20⁰C ~ +60⁰C Relative Humidity 10 – 90% RH Non-Condensing -
Multi touch PCAP Capacitive Touch Screen Panel
Qile offers a wide range of Projected Capacitive (PCAP) touch screens (also known as PCT), with a variety of enhancements, sizes and others options. We offer in-house design, engineering services, firmware tuning and other options to optimize the final touch solution for your end use.
Advantages: Projected capacitive touch screens offer superior touch performance, optical quality, lifespan, resistance to damage and other considerations. Our projected capacitive touch screens can support multiple gestures and up to 50 simultaneous touch points.
Application: Projected capacitive touch screens are commonly used in appliances, POS and retail, legal and amusement gaming, in-vehicle, industrial terminals, etc.
Features:
- High accuracy, sensitivity and linearity without periodic calibration
- Wide variety of screen enhancements and optical filters available
- Wide range of customization options for cover lens materials, decoration and other aspects
- Wide range of supported ICs and hardware
- Firmware tuning support provided by in-house dedicated software engineers
-
Structure of Multi touch PCAP Capacitive Touch Screen Panel
Glass + Glass (G + G)The panel is made of glass functional sheet and glass cover, which has good optical transparency, strength and light transmittance. It is one of the most common panel structures and is especially suitable for applications requiring good optical performance and high strength.
The cover consists of scratch-resistant glass (average hardness >7H), which can also be heat-treated or replaced by special glass such as Gorilla or Dragon Trail for better performance. For extreme applications, the cover plate thickness is up to 6 mm.
Glass + Film (G1F)
The panel consists of an inner PET film optically bonded to an outer glass cover. Lighter and thinner than GG for applications where weight and thickness are critical.
The cover consists of scratch-resistant glass (average hardness >7H), which can also be heat-treated or replaced by special glass such as Gorilla or Dragon Trail for better performance. For extreme applications, the cover plate thickness is up to 6 mm.
Glass+Film+Film (GFF)
The panel consists of 2 layers of PET film optically bonded to the outer glass cover plate. Similar strength to GG, but lighter and thinner than GG. Suitable for applications where weight and thickness requirements are high and are stronger and more impact resistant than G1F.
The cover consists of scratch-resistant glass (average hardness >7H), which can also be heat-treated or replaced by special glass such as Gorilla or Dragon Trail for better performance. For extreme applications, the cover plate thickness is up to 6 mm.
Plastic + Glass (P + G )
Comprising a plastic outer layer and a glass sensor layer, the panel is very cost-competitive in a smaller size and is lighter than an equivalent GG construction, but the plastic is prone to scratching. Typically suitable for small size applications where safety and cost are a concern.
According to product requirements, the cover plate can be composed of various plastic materials (PET, PC, composite materials, etc.), and the hardness can be between 2-4H. Although the plastic material is soft and easily scratched, it ensures no safety hazards due to glass shards, reduces costs and lead times, and improves forming and screen printing capabilities.
-
Product Specifications - General Item Specifications General Type Projected Capacitive Touch Panel Input Method Finger, Active Stylus, Gloved Touch (up to 50 touch points) Hardness ≥ 7H / ≥ 3H (PG products) Durability Warranty Standard Products: 1.5 years / Custom: As per application Tapping 10 Million Sliding 1 Million Electrical Operating Voltage 2.5 – 5V Response Time ≤ 25 ms Optical Transmittance ≥85% Haze ≤2% Environmental Storage Temp -30⁰C ~ +70⁰C Operating Temp -20⁰C ~ +60⁰C Relative Humidity 10 – 90% RH Non-Condensing Product Customization Parameter Options & Notes Screen Size (Inches) Custom size(4"-86") Integrated LCD Yes/No. Product Construction GG / G1F / GFF / PG Integration Tape Bonding / Optical Bonding (OCA & LOCA) Cover Lens Cover Lens Thickness 0.55mm – 10mm Cover Lens Material CS Glass, Gorilla Glass, Heat Tempered, PET, PMMA, etc. Additional Options Silk screening, logos, cut outs, colored glass, etc. Touch Controller & Interface Controller Location COB / COF Controller Type Silicon Works / EETI / Weida / Ilitek / Goodix / Customer Supplied Interface I2C, USB, RS232, UART Operating System Windows XP, 7-10, Linux, iOS, Android Touch Performance 2-50 touch points, palm rejection, water rejection,glove use,gestural controls, active stylus, etc. Miscellaneous Optical ≥85% Transmittance, ≤3% Haze Operating Temperature -20 C to 70 C Storage Temperature -30 C to 70 C Lifespan ≥5 million touches Product Enhancements Optical Anti-Glare / Anti-Reflection / Mirror Finish / Dead Front Others Anti-Fingerprint / Anti-Shatter Film / Hard Coat / EMI Resistance
the previous
Next
Contact Us
National Service Hotline:
-
E-mail：Sales@qile-tech.com
-
Address: 2nd Floor, block D, Huahan Innovation Park, No. 16, Langshan Road, Nanshan District, Shenzhen,China
