Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
PRODUCTS
Custom TFT LCD Touch Screen Monitor
- Details
- Product Overview
- Product Structure
- Customization
-
Custom TFT LCD Touch Screen Display Module
Qile offers a line of standard Thin Film Transistor Liquid Crystal Display (TFT-LCD) display modules with integrated projected capacitive (PCAP) touch capability primarily aimed at industrial and instrumentation applications. For this product line, Qile has partnered with Tianma Microelectronics to provide displays for their standard display module line. Tianma’s exceptional performance and reliability make their displays suitable for a variety of rugged automation, instrumentation and industrial control uses.
Parameter
Options & Notes
Product Construction
GG
Screen Size (Inches)
Custom size (4"-86") Touch Screen OD
Touch Screen AA
Cover Lens
Cover Lens Thickness
0.55mm – 10mm
Cover Lens Material
CS Glass, Gorilla Glass, Heat Tempered, PET, PMMA, etc.
Additional Options
Silk screening, logos, cut outs, colored glass, etc.
Touch Controller & Interface
Controller Location
COB / COF
Controller Type
Silicon Works / EETI / Weida / Ilitek / Goodix / Customer Supplied
Interface
I2C, USB, RS232, UART
Operating System
Windows XP, 7-10, Linux, iOS, Android
Touch Performance
10 touch points, palm rejection, water rejection
Miscellaneous
Optical
≥85% Transmittance, ≤3% Haze
Operating Temperature
-20 C to 70 C
Storage Temperature
-30 C to 70 C
Lifespan
≥5 million touches
Qile also provides custom-designed and built touch display modules to meet any combination of cost or performance needs. Whether it's sunlight readability, panel ruggedization, or extreme climate conditions, Qile's product engineers can provide a reliable solution to fit the requirements of your application and operating environment. Contact our sales team to set a consultation to define your project solution.
• Standard touch display modules sizes from 4.3” to 15”
• Custom range of touch display modules available from 4” to 86”
• Broad choice of displays, both commercial, consumer and prosumer, available
• Optical and tape bonding integration.
• Available in both Chip on Flex (COF) or Chip on Board (COB) configurations.
• Various supported ICs and hardware.
• Screen enhancements, filters, cover lens customization and other features can be tailored to a variety of industry and end-user requirements.
• Firmware tuning support provided by in-house dedicated software engineers.
Key words:- touch screen and display intergation
- tft lcd intergation with touch screen
-
Touch Screen Integration & Display Services
In addition to our touch screen product line, Qile also offers touch screen integration services to our customers. Touch screen integration bonds the touch panel and sensor to the selected display in order to fix it in place for final integration into a metal or plastic enclosure. Integration can offer a wide range of benefits, but there are a number of considerations based on enclosure design, end application, LCD structure, etc. A consultation with Qile's experienced project team can help you determine the right solution for your needs and then put that solution in place.
• ISO 9001 and 14001 certified manufacturer with class 1K clean room and class 100+ integration areas
• Flexible production cells to improve process control and reduce MOQs
• Turn-key solution reduces supply chain and logistics costs
-
Qile offers the following options for touch screen and display integration:
Tape Bonding
Also known as air gap or perimeter bonding, this is the simplest and most economical way of adhering the touch panel to the display. This process takes place in our cleanroom where we use a variety of industrial adhesive tapes and specialized jigs/positioning frames to assist the process.
• Cost effective solution to provide improved mechanical and environmental performance at low costs
• Extremely high yield rate and high reworkability
Dry Optical Bonding (OCA)
Dry optical bonding uses sheets of clear sheet adhesive to completely fill the air gap between the display and touch panel and enhance the performance of the assembly. A good mix of improved performance, efficiency and cost competitiveness.
• Cost is considerably lower than LOCA, with good performance for most applications
• Fast and easy integration process using pre-cut sheet adhesive
• Similar optical and mechanical qualities to LOCA bonding
Liquid Optical Bonding (LOCA)
Liquid optical bonding (or LOCA) is a bonding method where the touch sensor is adhered directly to the display by using an optically clear adhesive to form a direct bond without leaving any gap or space between the two. It is generally the most expensive bonding option and is often used for the most demanding or exacting environments, where performance is at a premium.
• Superior optical qualities including better contrast, better transmission, better readability and other aspects by removing internal reflections between the display and the touch assembly.
• Superior mechanical properties, including better adhesion, improved impact and vibration resistance
• Superior environmental resistance, including extreme temperatures, elimination of contamination, fogging and condensation in air gap
-
Product Specifications - General Item Specifications General Type Projected Capacitive Touch Panel Input Method Finger, Active Stylus, Gloved Touch (up to 50 touch points) Hardness ≥ 7H / ≥ 3H (PG products) Durability Warranty Standard Products: 1.5 years / Custom: As per application Tapping 10 Million Sliding 1 Million Electrical Operating Voltage 2.5 – 5V Response Time ≤ 25 ms Optical Transmittance ≥85% Haze ≤2% Environmental Storage Temp -30⁰C ~ +70⁰C Operating Temp -20⁰C ~ +60⁰C Relative Humidity 10 – 90% RH Non-Condensing Product Customization Parameter Options & Notes Screen Size (Inches) Custom size(4"-86") Integrated LCD Yes/No. Product Construction GG / G1F / GFF / PG Integration Tape Bonding / Optical Bonding (OCA & LOCA) Cover Lens Cover Lens Thickness 0.55mm – 10mm Cover Lens Material CS Glass, Gorilla Glass, Heat Tempered, PET, PMMA, etc. Additional Options Silk screening, logos, cut outs, colored glass, etc. Touch Controller & Interface Controller Location COB / COF Controller Type Silicon Works / EETI / Weida / Ilitek / Goodix / Customer Supplied Interface I2C, USB, RS232, UART Operating System Windows XP, 7-10, Linux, iOS, Android Touch Performance 2-50 touch points, palm rejection, water rejection,glove use,gestural controls, active stylus, etc. Miscellaneous Optical ≥85% Transmittance, ≤3% Haze Operating Temperature -20 C to 70 C Storage Temperature -30 C to 70 C Lifespan ≥5 million touches Product Enhancements Optical Anti-Glare / Anti-Reflection / Mirror Finish / Dead Front Others Anti-Fingerprint / Anti-Shatter Film / Hard Coat / EMI Resistance
Related products
undefined
ONLINE MESSAGE
*Note: Please fill in the information accurately and keep the communication smooth. We will contact you as soon as possible
Custom TFT LCD Touch Screen Monitor
- Details
- Product Overview
- Product Structure
- Customization
-
Custom TFT LCD Touch Screen Display Module
Qile offers a line of standard Thin Film Transistor Liquid Crystal Display (TFT-LCD) display modules with integrated projected capacitive (PCAP) touch capability primarily aimed at industrial and instrumentation applications. For this product line, Qile has partnered with Tianma Microelectronics to provide displays for their standard display module line. Tianma’s exceptional performance and reliability make their displays suitable for a variety of rugged automation, instrumentation and industrial control uses.
Parameter
Options & Notes
Product Construction
GG
Screen Size (Inches)
Custom size (4"-86") Touch Screen OD
Touch Screen AA
Cover Lens
Cover Lens Thickness
0.55mm – 10mm
Cover Lens Material
CS Glass, Gorilla Glass, Heat Tempered, PET, PMMA, etc.
Additional Options
Silk screening, logos, cut outs, colored glass, etc.
Touch Controller & Interface
Controller Location
COB / COF
Controller Type
Silicon Works / EETI / Weida / Ilitek / Goodix / Customer Supplied
Interface
I2C, USB, RS232, UART
Operating System
Windows XP, 7-10, Linux, iOS, Android
Touch Performance
10 touch points, palm rejection, water rejection
Miscellaneous
Optical
≥85% Transmittance, ≤3% Haze
Operating Temperature
-20 C to 70 C
Storage Temperature
-30 C to 70 C
Lifespan
≥5 million touches
Qile also provides custom-designed and built touch display modules to meet any combination of cost or performance needs. Whether it's sunlight readability, panel ruggedization, or extreme climate conditions, Qile's product engineers can provide a reliable solution to fit the requirements of your application and operating environment. Contact our sales team to set a consultation to define your project solution.
• Standard touch display modules sizes from 4.3” to 15”
• Custom range of touch display modules available from 4” to 86”
• Broad choice of displays, both commercial, consumer and prosumer, available
• Optical and tape bonding integration.
• Available in both Chip on Flex (COF) or Chip on Board (COB) configurations.
• Various supported ICs and hardware.
• Screen enhancements, filters, cover lens customization and other features can be tailored to a variety of industry and end-user requirements.
• Firmware tuning support provided by in-house dedicated software engineers.
Key words:- touch screen and display intergation
- tft lcd intergation with touch screen
-
Touch Screen Integration & Display Services
In addition to our touch screen product line, Qile also offers touch screen integration services to our customers. Touch screen integration bonds the touch panel and sensor to the selected display in order to fix it in place for final integration into a metal or plastic enclosure. Integration can offer a wide range of benefits, but there are a number of considerations based on enclosure design, end application, LCD structure, etc. A consultation with Qile's experienced project team can help you determine the right solution for your needs and then put that solution in place.
• ISO 9001 and 14001 certified manufacturer with class 1K clean room and class 100+ integration areas
• Flexible production cells to improve process control and reduce MOQs
• Turn-key solution reduces supply chain and logistics costs
-
Qile offers the following options for touch screen and display integration:
Tape Bonding
Also known as air gap or perimeter bonding, this is the simplest and most economical way of adhering the touch panel to the display. This process takes place in our cleanroom where we use a variety of industrial adhesive tapes and specialized jigs/positioning frames to assist the process.
• Cost effective solution to provide improved mechanical and environmental performance at low costs
• Extremely high yield rate and high reworkability
Dry Optical Bonding (OCA)
Dry optical bonding uses sheets of clear sheet adhesive to completely fill the air gap between the display and touch panel and enhance the performance of the assembly. A good mix of improved performance, efficiency and cost competitiveness.
• Cost is considerably lower than LOCA, with good performance for most applications
• Fast and easy integration process using pre-cut sheet adhesive
• Similar optical and mechanical qualities to LOCA bonding
Liquid Optical Bonding (LOCA)
Liquid optical bonding (or LOCA) is a bonding method where the touch sensor is adhered directly to the display by using an optically clear adhesive to form a direct bond without leaving any gap or space between the two. It is generally the most expensive bonding option and is often used for the most demanding or exacting environments, where performance is at a premium.
• Superior optical qualities including better contrast, better transmission, better readability and other aspects by removing internal reflections between the display and the touch assembly.
• Superior mechanical properties, including better adhesion, improved impact and vibration resistance
• Superior environmental resistance, including extreme temperatures, elimination of contamination, fogging and condensation in air gap
-
Product Specifications - General Item Specifications General Type Projected Capacitive Touch Panel Input Method Finger, Active Stylus, Gloved Touch (up to 50 touch points) Hardness ≥ 7H / ≥ 3H (PG products) Durability Warranty Standard Products: 1.5 years / Custom: As per application Tapping 10 Million Sliding 1 Million Electrical Operating Voltage 2.5 – 5V Response Time ≤ 25 ms Optical Transmittance ≥85% Haze ≤2% Environmental Storage Temp -30⁰C ~ +70⁰C Operating Temp -20⁰C ~ +60⁰C Relative Humidity 10 – 90% RH Non-Condensing Product Customization Parameter Options & Notes Screen Size (Inches) Custom size(4"-86") Integrated LCD Yes/No. Product Construction GG / G1F / GFF / PG Integration Tape Bonding / Optical Bonding (OCA & LOCA) Cover Lens Cover Lens Thickness 0.55mm – 10mm Cover Lens Material CS Glass, Gorilla Glass, Heat Tempered, PET, PMMA, etc. Additional Options Silk screening, logos, cut outs, colored glass, etc. Touch Controller & Interface Controller Location COB / COF Controller Type Silicon Works / EETI / Weida / Ilitek / Goodix / Customer Supplied Interface I2C, USB, RS232, UART Operating System Windows XP, 7-10, Linux, iOS, Android Touch Performance 2-50 touch points, palm rejection, water rejection,glove use,gestural controls, active stylus, etc. Miscellaneous Optical ≥85% Transmittance, ≤3% Haze Operating Temperature -20 C to 70 C Storage Temperature -30 C to 70 C Lifespan ≥5 million touches Product Enhancements Optical Anti-Glare / Anti-Reflection / Mirror Finish / Dead Front Others Anti-Fingerprint / Anti-Shatter Film / Hard Coat / EMI Resistance
Related products
undefined
Contact Us
National Service Hotline:
-
E-mail：Sales@qile-tech.com
-
Address: 2nd Floor, block D, Huahan Innovation Park, No. 16, Langshan Road, Nanshan District, Shenzhen,China
